Filter
Top Products
WAN and System Configuration 2-13
Changing a Frame Relay DLCI configuration
To modify a Frame Relay DLCI configuration, select Display/Change DLCIs in the Frame Relay DLCI
Configuration screen.
Select a DLCI Name from the table and press Return to go to the Change DLCI screen. The parameters in this
screen are the same as the parameters in the Add DLCI screen. To find out how to set them, see “Adding a
Frame Relay DLCI configuration” on page 2-14.
Change DLCI
DLCI Name: DLCI 33
DLCI Enabled: Yes
DLCI Number (16-991): 32
Remote IP Address: 2.0.0.2