Filter
Top Products
2-22 Firmware User Guide
■ Circuit Enabled allows you to enable or disable the circuit, using the Tab key. The default is enabled.
■ Traffic Type allows you to select which type of traffic will be routed on this circuit, Voice or Data. If you
choose Voice, the Connection Profile is field becomes unavailable and does not display.
■ Circuit VPI allows you to specify the Virtual Path Identifier (VPI) value for the circuit. The default VPI value
for both ADSL and cell-based DSL is zero (0).
■ Circuit VCI allows you to specify the Virtual Channel Identifier (VCI) value for the circuit. The default VCI
value depends on the type of DSLAM to which you are connecting.
■ Accessing the Connection Profile Is field in the Change Circuit menu depends not on the number of
Connection Profiles you have created, but the number of data VCs you have added. (See “Multiple ATM PVC
configuration” on page 2-16.) If you have more than one data VC you can choose how Connection Profiles
are associated with VCs, otherwise you get default behavior and the Connection Profile Is field cannot be
selected.
Monitoring multiple virtual circuits
The General Statistics screen adds a selection for ATM VC Statistics.
To access the ATM VC Statistics screen navigate from the Main Menu to Statistics & Logs then General
Statistics.
The General Statistics screen appears.
Main
Menu
Statistics
& Logs
General
Statistics
General Statistics
Physical I/F-----Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err
Ethernet Hub 0 0 0 0 0 0
Aux Async 0 0 0 0 0 0
ATM SDSL 1 22152 5092 403 404 0 0
Network----------Rx Bytes---Tx Bytes---Rx Pkts---Tx Pkts----Rx Err----Tx Err
IP 0 0 0 0 0 0
VC Traffic Statistics...