Filter
Top Products
2-26 Firmware User Guide
Return to the Add Connection Profile screen by pressing Escape.
5. Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.
Datalink (PPP/MP) Options
Data Compression... Standard LZS
Send Authentication... PAP
Send User Name:
Send Password:
Receive User Name:
Receive Password:
❥ If you are creating a Backup profile (supported
models only), and have selected Backup as the
Interface Group in the previous screen, you can
toggle Dial on Demand to Yes (the default) or No.
See “Line Backup” on page 7-1 for more
information.
Datalink (PPP/MP) Options
Data Compression... Standard LZS
Send Authentication... PAP
Send User Name:
Send Password:
Receive User Name:
Receive Password:
Dial on Demand: Yes
❥ Data Compression defaults to Standard LZS. You
can select Ascend LZS, if you are connecting to
compatible equipment, or None from the
pull-down menu.
❥ The Send Authentication pull-down menu lets
you select PAP, CHAP, or None.
❥ Selecting PAP or CHAP allows you to enter your
authentication credentials for both sending and
receiving connections.
PAP requires a User Name and Password;
CHAP requires a Host Name and Secret.
The screen changes to accommodate your
selection.