Filter
Top Products
10-4 Firmware User Guide
Limited user configuration
The Add Access Name/Password and Show/Change Access Name/Passwords screens allow you to select
which configuration features a limited (non-Superuser) user can access. From the Security Options screen,
select Add Access Name/Password. The Add Access Name/Password screen appears.
■ Assign a User Name and Password, and enable or disable Telnet and Web access as in the Superuser
Configuration screen.
■ Select Access Privileges, and from the pull-down menu, choose which access privilege you want this user
to have: All, LAN, WAN, or for IADs only, VOX.
If you assign any of these privileges, limited users will have full access to privileges associated with these
interfaces. You can customize these privileges further, in order to limit access to only certain portions of
those interfaces’ configuration, by selecting Custom. If you select Custom, the Access Privileges
(Custom) screen appears.
Add Access Name/Password
Name (19 characters max): user
Password: ********************
Telnet Access Enabled: Yes
Web Access Enabled: +-----------+
+-----------+
Access Privileges... | All |
| LAN |
| WAN |
| VOX |
| Custom... |
+-----------+
ADD USER CANCEL