Filter
Top Products
WAN and System Configuration 2-45
You can reinstate router mode by returning to the System Configuration menu.
Select Change Device to a Router.
Press Return, confirm your choice, and the device will restart in router mode.
Bridged Frame-Relay. Note: Netopia Firmware Version 5.4 now supports additional Frame Relay configuration
options when the Netopia device is operating in bridged mode.
Bridged Frame Relay (RFC 2427) is an extension of the existing onboard Frame Relay capability. Frame
Relay-capable Netopia routers (ex: T-1, IDSL) may be run in bridged mode, with the WAN handling Frame Relay
packets that are bridged to the Ethernet interface. For these models, LMI, multiple DLCIs, etc. can be
configured.
If you choose to run the router in bridged mode, and select Frame Relay as the data link encapsulation method
in the WAN (Wide Area Network) Setup menu, the WAN Configuration menu now offers options to configure
Frame Relay and Frame Relay DLCIs.
Netopia Router
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick View...
System Configuration
Management IP Setup...
Filter Sets...
Date and Time...
Console Configuration...
SNMP (Simple Network Management Protocol)...
Security...
Upgrade Feature Set...
Change Device to a Router...
Logging...
Use this screen if you want options beyond Easy Setup.