Filter
Top Products
WAN and System Configuration 2-43
Console Configuration
You can change the default terminal communications parameters to suit your requirements.
To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.
Follow these steps to change a parameter’s value:
1. Select 57600, 38400, 19200, or 9600.
2. Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameter
unchanged and exit the Console Configuration screen.
SNMP (Simple Network Management Protocol)
These screens allow you to monitor and configure your network by means of a standard Simple Network
Management Protocol (SNMP) agent.
■ Details are given in “Simple Network Management Protocol (SNMP) - V2c” on page 9-10.
Security
These screens allow you to add users and define passwords on your network.
■ Details are given in “Security” on page 10-1.
Upgrade Feature Set
You can upgrade your Router by adding new feature sets through the Upgrade Feature Set utility.
See the release notes that came with your router or feature set upgrade, or visit the Netopia Web site at
www.netopia.com for information on new feature sets, how to obtain them, and how to install them on your
Router.
Console Configuration
Baud Rate... 57600
SET CONFIG NOW CANCEL