Filter
Top Products
1-2 Reference Guide
How to use this guide
This guide is organized into chapters describing each of the Netopia
Router’s advanced features. You may want to read each chapter’s
introductory section to familiarize yourself with the various features
available.
You can also use this summary to locate relevant sections:
■
To configure ISDN setup parameters, see “ISDN WAN Setup” on
page 2-2.
■
To configure leased line setup parameters, see “Leased line WAN
Setup” on page 2-5.
■
To add or modify connection profiles, see “Connection profiles for
ISDN and Leased lines” on page 2-13.
■
To configure the default profile for an ISDN or leased line, see
“Default profile” on page 2-39.
■
To put the advanced configuration changes into effect,
“Restarting the system” on page 10-8.
■
To manually establish a connection with an existing connection
profile, see “Establishing a WAN Connection” on page 2-30.
400 Netopia series
models only
■
To use the AppleTalk Update-Based Routing Protocol (AURP), see
“AURP setup” on page 6-12.
■
To schedule regular or one-time connections, see “Scheduled
connections” on page 2-49.
■
To configure dynamic IP address service (DHCP, MacIP, or
BOOTP), see “IP address serving” on page 4-16.
■
For testing network connections, see “The ISDN loopback test”
on page 10-9 to test a switched ISDN line, and “Ping” on
page 10-3 to test connections to IP hosts.