Filter
Top Products
2-36 Reference Guide
Changing a Frame Relay DLCI configuration
To modify a Frame Relay DLCI configuration, select Display/Change
DLCIs in the Frame Relay DLCI Configuration screen.
Select a DLCI Name from the table and press Return to go to the
Change DLCI screen. The parameters in this screen are the same as
the parameters in the Add DLCI screen. To find out how to set them,
see “Adding a Frame Relay DLCI configuration” on page 2-37.
Change DLCI
DLCI Name: DLCI 33
DLCI Enabled: Yes
DLCI Number (16-991): 32
Remote IP Address: 2.0.0.2
Here you configure the parameters for a single DLCI (Data Link Circuit ID).
Deleting a Frame Relay DLCI configuration
To delete a Frame Relay DLCI configuration, select Delete DLCI in the
Frame Relay DLCI Configuration screen and press Return to display
the Frame Relay DLCI configuration table.
+----------------------------------------------------------------------+
| |
| Are you sure you want to delete this DLCI? |
| |
| CANCEL CONTINUE |
| |
| |
+----------------------------------------------------------------------+
1. Highlight the Frame Relay DLCI configuration you wish to delete.
Press Return.