Filter
Top Products
2-6 Reference Guide
WAN Setup
Line Configuration...
Frame Relay Configuration...
Frame Relay DLCI Configuration...
Connection Profiles...
Default Profile...
From here you will configure yours and the remote sites' WAN
information.
Note: For all leased line Netopia Router models using PPP or Cisco-
HDLC datalink encapsulation, the Frame Relay Configuration and
Frame Relay DLCI Configuration options will be hidden.
For all leased line Netopia Router models using Cisco-HDLC datalink
encapsulation, the Default Profile option will remain hidden.
If you have completed Easy Setup (see the
Getting Started
Guide
),
the information you have already entered will appear in some of the
WAN Setup screens.
Leased line configuration
The following Leased line configuration section describes the first
step in configuring the Line Configuration screen in the WAN Setup
menu for an SA/Serial, T1, and DDS Netopia Router wanlet module
with PPP, Cisco-HDLC, or Frame Relay datalink encapsulation
enabled.
The Serial Line Configuration screen appears for SA/Serial leased
line models (with an external CSU/DSU connection). See below.
The T1 Line Configuration screen appears for T1 leased line models
(with an internal CSU/DSU connection). See page 2-9.