Filter
Top Products
AppleTalk Setup 6-15
Receiving AURP connections
■ To control the acceptance of incoming AURP tunnels, select
Accept Connections From and choose Anyone or Configured
Partners Only from the pop-up menu. If you choose Anyone, all
incoming AURP connections will be accepted.
The more secure option is Configured Partners Only, which
only accepts connections from recognized AURP partners (the
ones you have set up).
Configuring AURP Options
In the AURP Setup screen, select Advanced Options and go to the
AURP Options screen. Using AURP can cause a problem when two
networks, one local and one remote, have the same network
number. This may cause network routing ambiguities than can result
in routing errors.
AURP Options
Tickle Interval (HH:MM:SS): 00:00:00
Update Interval (HH:MM:SS): 00:00:30
Enable Network Number Remapping: Yes
Remap into Range
From: 4096
To: 32768
Cluster Remote Networks: No
Enable Hop-Count Reduction: No
■ Select Tickle Interval (HH:MM:SS) and set the timer to
indicate how often a tickle or ‘are you still there’ packet will be
sent to the remote AppleTalk Network.