Filter
Top Products
2-30 Reference Guide
ISDN Switched circuit
models only
Available for inbound calls
only
■ The CNA Validation Number is the telephone number that your
Netopia Router will match to incoming calls. Question marks
“?” can be used in place of numbers as wild card characters to
ensure that matches are made on different directory numbers.
See “Default profile” on page 2-39 for information on CNA
(Calling Number Authentication).
Available for inbound calls
only
■ Select Callback and toggle to Yes to drop incoming answered
calls and use this connection profile to call the remote network
back. (See “Default profile” on page 2-39 for information on
incoming calls matching connection profiles). The default for
Callback is No.
You are now finished configuring the Telco options screen.
Press the Escape key to return to the Add Connection Profile
screen.
12. From the Add Connection Profile screen, select ADD PROFILE
NOW to save the current connection profile information that you
have just entered, and press Return to go to the Connection
Profiles screen. Alternatively, you can cancel the connection
profile you have just constructed by selecting CANCEL to exit
the Add Connection Profile screen.
Establishing a WAN Connection
Switched circuit models
only
To establish a manual WAN connection call, select Establish WAN
Connection from the Connection Profiles screen and press Return.
The Establish WAN Connection pop-up menu displays a table of all
of the connection profiles you have previously defined. Highlight the
connection profile you wish to manually call. Press Return and the
connection you select will initiate a call.
Call Status
Profile Name -- Panost, Inc.
Connection State -- Acquiring
Hit ESCAPE/RETURN/ENTER to return to previous menu.