Filter
Top Products
2-48 Reference Guide
■ To allow calls that
only
match a connection profile’s remote IP
and/or IPX address:
■ Toggle Must Match a Defined Profile to Yes,
and
■ set Authentication to None.
■ To not allow
any
incoming calls to connect to the Netopia Router:
■ Toggle Must Match a Defined Profile to Yes,
and
■ Set the Dial option in the Telco Options screen of every con-
nection profile to Dial Out Only
WAN IP Address Serving
Small Office ISDN
models only
The Netopia Router supports WAN IP Address Serving.
With WAN IP Address Serving the Netopia Router serves an IP
address to an incoming call. The incoming caller can be either a TA
(Terminal Adapter), such as the Netopia ISDN Modem, or another
Netopia Router with the NAT (Network Address Translation) feature
set. The incoming caller will dynamically obtain an IP address from a
pool of IP addresses that the Netopia Router serves.
The Netopia Router serving the IP address should have a connection
profile with an IP address of 0.0.0.0 defined for the calling TA or
router.
Main
Menu
Advanced
Config.
IP Address
Serving