Oki 6010E Printer User Manual


 
IV - 30
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
Configuring the OkiLAN 6010e Using
OkiNet for TCP/IP
The following steps outline how to configure an
OkiLAN 6010e. To change settings of a previously
configured OkiLAN 6010e, follow the same procedure
but skip Step 3, as no prompt will appear.
1. Select the OkiLAN 6010e you wish to
configure.
2. Select Configuration from the Print Server
menu or select the Configuration icon on
the toolbar.
3. When prompted, enter the IP Address of the
OkiLAN 6010e.
4. Set the appropriate configuration by choos-
ing the applicable file folder tabs.
The following settings are configurable:
TCP/IP
Output Port
NetWare
SNMP
NetWare Port
Protocols
NetWare Queues
SNMP Traps