Oki 6010E Printer User Manual


 
IV - 40
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
Enabling/Disabling Protocols
To enable or disable protocols on the OkiLAN 6010e,
select the Protocols tab. Select each protocol you wish
to enable. If you disable a protocol, the OkiLAN 6010e
will no longer communicate using that protocol.
SNMP Trap Configuration
The SNMP Trap option allows configuration of traps.
Traps are unsolicited information concerning the
OkiLAN 6010e. Traps can be sent to an SNMP man-
ager or be broadcast to all hosts on the local segment.
To configure SNMP traps, select the SNMP Traps tab.
Note: SNMP options need to be configured only if you
are managing an OkiLAN 6010e or getting system
information using SNMP.