Filter
Top Products
IV - 56
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
Remember, when choosing a permanent IP address:
• The IP address must follow the format
XXX.XXX.XXX.XXX, where each XXX is
a number between 0 and 255.
• If you select an invalid IP address you may
not be able to access the OkiLAN 6010e.
• You can also use OkiNet for TCP/IP, OkiNet
for NetWare or the Banyan VINES OkiNet
for VINES utilities to set a permanent IP
address.
Note: If you select an invalid IP address you may not be
able to access the OkiLAN 6010e. Use this option with
care!
Specify the Subnet Mask for Your
Network (Option 4)
If your network environment includes subnets, you will
want to set the subnet mask.
The subnet mask must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
The default subnet mask is 0.0.0.0. The OkiLAN 6010e
interprets a subnet mask of 0.0.0.0 or 255.255.255.255
as no subnet mask specified.