Filter
Top Products
IV - 68
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
If you do not know the configuration of the OkiLAN
6010e or you think the configuration has been changed,
use the following method for printing a configuration
page:
• With the network cable detached, attach the
OkiLAN 6010e to a printer and power cycle
the print server. When the OkiLAN 6010e
powers up, it will detect the detached net-
work cable and print a configuration sheet. If
no configuration sheet is printed and the
indicator has turned green, check the printer
and verify it is ready to print. If you are
using boot protocols (RARP or BOOTP) to
assign the IP address, the IP address will be
listed as Using network protocol (0.0.0.0) on
the configuration page.
Unable to Print
LPR/LP
• If the indicator blinks green, the OkiLAN
6010e is receiving data. If nothing is actu-
ally printing, check the printer settings. For
example, if you are using a PostScript
printer, verify the OkiLAN 6010e is also set
to PostScript.
• Try pinging the OkiLAN 6010e by its IP
address (not the hostname). This will verify
the unit is functioning on the network.