Oki 6010E Printer User Manual


 
IV - 74
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
4. The bootpd daemon transmits a response to
the OkiLAN 6010e with the IP address
192.168.42.55. The OkiLAN 6010e will use
this IP address for all subsequent transmis-
sions.
For these steps to work properly, at least one BOOTP
daemon (bootpd) must be running on the BOOTP
server. To test whether a BOOTP daemon is running on
the BOOTP server, use the ps command with the show
all process option within fifteen minutes of an at-
tempted BOOTP request. Unfortunately, the ps options
differ from one UNIX workstation to another. Perform a
man ps at the UNIX prompt to consult a manual page
on the ps command for a particular workstation. If
bootpd is not running on a workstation, type man
bootpd at the UNIX prompt to consult a manual page
on the BOOTP daemon and how to start it.
Limitations
Often TCP/IP networks are divided into subnets.
BOOTP does not work across subnets. When installing
an OkiLAN 6010e, make sure the following criteria are
met for BOOTP to work properly.
Both the BOOTP server and the OkiLAN
6010e are physically attached to the same
subnet.
The IP address assigned to the OkiLAN
6010e and the IP address of the BOOTP
server belong to the same subnet.