Filter
Top Products
NetWare
III - 11
Section III - NetWare
OKI OkiLAN 6010e User’s Guide
PServer or RPrinter Mode
Several factors should be considered when choosing
between PServer or RPrinter mode. For more detailed
information regarding these modes, see page III-4.
Bindery Settings
• Default File Server – The default file server can be
selected from any file server listed in the Default
File Server scroll menu. The default file server must
be active at power up for the OkiLAN 6010e to
recognize other servers.
• Print Server Name – Enter the print server name of
your choice.
NDS Settings
NDS settings need to first be created and setup using
the NWAdmin or PConsole utility. Create an NDS print
server object. Then, create one NDS printer object per
output port. For example, Printer 1 goes to Port 1,
Printer 2 goes to port 2. Attach NDS print queues to the
NDS printer objects. Once you have created NDS
objects and queues, use the OkiNet for NetWare utility
to configure the following fields:
• Preferred File Server – This is the file server on
which the print server object was created.
• Preferred Tree – This is the NDS tree on which the
NDS print server object was created.
• Print Server Name – The fully qualified (canonical)
name of the NDS print server object that was
created.