Oki 6010E Printer User Manual


 
TCP/IP
IV - 79
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
Configuring HP-UX v8.07 for Printing
with the OkiLAN 6010e
This application note describes the configuration of the
printing system on the HP-UX ver. 8.07 of the UNIX
operating system. For clarity and brevity, the following
specific names will be used to represent general devices
or concepts.
lj4 – The local queue name on the HP-UX
system to which print jobs that are destined
for a printer attached to the OkiLAN 6010e
will be directed.
OKIPRINTER – The host name of the
remote system which is the OkiLAN 6010e.
For example, to telnet to the OkiLAN 6010e
and invoke the OkiLAN 6010e Configura-
tion utility, you would type telnet
OKIPRINTER. A host name is not required
for the OkiLAN 6010e, the IP Address may
be used.
yourqueuename – This is the name of the
queue on the OkiLAN 6010e and must end
with 1, 2, 3 or 4, depending on the port
selected to service the print jobs.
If FF, LF or NF are the last two letters of the
queue name, the job will be converted
accordingly. See pages 18 through 20 for
more information on remote queue names.