Filter
Top Products
TCP/IP
IV - 51
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
Add
Select the Add button to define access to a new
OkiLAN 6010e or a group of OkiLAN 6010e print
servers. The IP address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
from 0 to 255. Use * to specify groups/subnets.
For example: To add a single OkiLAN 6010e,
enter 198.168.42.24. To add a group of OkiLAN
6010e print servers, enter 198.168.42.*.
Delete
The Delete button deletes an OkiLAN 6010e access
entry in the IP address.
Configuring the Discovery UDP Port
Number
In order to discover OkiLAN 6010e print servers on the
network, OkiNet for TCP/IP communicates with the
OkiLAN 6010e print servers on a UDP port number.
Normally, using this port number should not interfere
with other devices on the network. If there are problems
using the given port number, select a new number.
Note: Windows NT will not permit the use of Port 9 for
discovery. Select one of the other available ports.