Oki 6010E Printer User Manual


 
NetWare
III - 5
Section III - NetWare
OKI OkiLAN 6010e User’s Guide
Chapter 1: Introduction
Overview
This section contains instructions and information on
how to configure your OkiLAN 6010e in the NetWare
environment.
There are two environments in which to configure the
OkiLAN 6010e:
Bindery (NetWare 3.x)
NetWare Directory Services (NDS)—for
NetWare versions 4.1 and later.
Before You Start
You should be familiar with network admin-
istration as well as the physical setup and
operation of your network.
Write down the serial number and the
Ethernet address of your OkiLAN 6010e.
You will find these numbers on the OkiLAN
6010e enclosure.
Install the OkiLAN 6010e hardware and
connect the cabling—see Section I. Instruc-
tions for hardware installation are found in
Section I of this manual.
Install the OkiNet Utility for NetWare—see
Section I.