Filter
Top Products
TCP/IP
IV - 57
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
If you change the subnet mask, the change will remain
undetected until the OkiLAN 6010e is reset or is power
cycled.
Note: If you select an invalid subnet mask you may not
be able to access the OkiLAN 6010e. Use this option
with care!
Identify Default Gateway IP Address
(Option 5)
If your local network is attached to other networks, you
must specify the address of your default gateway.
Whenever packets need to be sent to another network,
the default gateway is used.
The gateway address must follow the format
XXX.XXX.XXX.XXX, where each XXX is a number
between 0 and 255.
When the default gateway is changed, it will remain
undetected until the OkiLAN 6010e is reset or is power
cycled.
Note: If you select an invalid default gateway or the
default gateway goes down, the OkiLAN 6010e may
not be able to communicate with non-local networks.