Filter
Top Products
TCP/IP
IV - 69
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
• If the ping succeeds, try ftping a test file to
the print server. If the ping fails, you might
have a configuration problem with the
OkiLAN 6010e (the IP address or gateway
address might be incorrect, etc.).
• If the ftp succeeds, there is a problem with
the lpr/lp setup. Verify the hostname or IP
address is correctly set for the queue. Try
doing an lpstat (System V) or lpq (BSD) to
query the status of the OkiLAN 6010e.
FTP
• If the indicator blinks green, the printer is
receiving data. If nothing is actually print-
ing, check the printer settings. For example,
if you are using a PostScript printer, verify
the OkiLAN 6010e is set to PostScript also.
• Try pinging the device by its IP address (not
the hostname). This will verify the OkiLAN
6010e is functioning on the network.
• If you cannot connect over ftp but the ping
succeeds, try telneting to the OkiLAN 6010e
and print a configuration page to verify
settings. If that fails, you might have a TCP/
IP configuration problem with the OkiLAN
6010e.