Oki 6010E Printer User Manual


 
IV - 36
Section IV - TCP/IP
OKI OkiLAN 6010e User’s Guide
OFF – Print data stream will be sent directly to the
output port without alteration.
PCL – Inserts the appropriate character string in
front of each print job to switch the printer to the
PCL print language.
PostScript – Inserts the appropriate character string
in front of each print job to switch the printer to the
PostScript printer language.
Automatic – Enables the auto language sensing
function. This function examines the print job data
stream and determines the required print language
and inserts the appropriate character string in front
of each print job to switch the printer to the appro-
priate printer language.
Note: If you are not switching languages or the printer
can switch automatically, this option should be set to
OFF.
Printer Type
The Printer Type selection is used to determine the
actual character string required for your printer. If your
printer type is not listed, select Other and enter the
character string for switching the printer to PCL or
PostScript mode.
To enter nonprintable characters, enclose the ASCII
value of the character in angle brackets. For example, to
enter the ESC character type: <27>.
PCL Switch Sequence
Enter the character string to switch the printer to the
PCL print language.