Oki 6010E Printer User Manual


 
V - 10
Section V - Windows Printing
OKI OkiLAN 6010e User’s Guide
OkiLAN 6010e Connect for DLC
OkiLAN 6010e Connect for Data-Link Control (DLC)
provides a direct printing solution for users in Microsoft
Windows NT serverless environments with the DLC/
LLC protocol. Print jobs printed through OkiLAN
6010e Connect are sent directly to the OkiLAN 6010e
print server and not routed through the network server,
resulting in a reduction of network traffic. OkiLAN
6010e Connect for DLC can be used to configure the
print server, obtain status from the print server and
printer, and send jobs to the printer.
Note: To obtain a version of OkiLAN 6010e Connect
for DLC that supports Windows NT, visit our FTP site
(ftp://ftp.extendsys.com/pub/printserver/utilities/) or
contact Technical Support.
Configure Port
If you have printing problems while using the OkiLAN
6010e Connect printing port, you may check the status
of the port by selecting Configure Port under the Ports
tab in the Properties screen.
Notify On Printer Error
This feature will check the printer status prior to print-
ing the job. If a printer error is detected (e.g. printer off-
line or out of paper) the error description will be given.
Notify When Printed
This feature will provide an alert when your job is
active on the printer. This may be useful if the printer is
especially busy.