Filter
Top Products
III - 20
Section III - NetWare
OKI OkiLAN 6010e User’s Guide
Printer Traps
Select the printer traps to be activated. The following
printer conditions may cause a printer trap to occur:
• On-line
• Off-line
• No Printer Attached
• Paper Out
• Toner Low
• Paper Jam
• Door Open
• Printer Error
Note: Toner Low, Paper Jam and Door Open require the
printer to be set in PCL or Auto mode.
Saving the Configuration
Once all settings have been defined, select OK. The
settings will be saved and you will be returned to the
main OkiNet for NetWare screen.
Enabling/Disabling Protocols
To enable or disable protocols on the OkiLAN 6010e,
select the Protocols file tab. Select each protocol you
wish to enable. If you disable a protocol, the OkiLAN
6010e will no longer communicate using that protocol.
To reduce unnecessary network traffic, disable unused
protocols.