Filter
Top Products
Page: 89
Service Manual for OF5800
Chapter 3 Adjustment Procedures
User programmed information such as autodialer entries, date, time, Transmit Terminal Identifier (TTI),
Subscriber ID, etc., are stored in the unit's Random Access Memory (RAM). The primary back up battery
maintains these settings if power is lost.
This function does not clear the soft parameters. Therefore, this setting is useful to reset the user
programmed information but leave specific parameters configured for a particular telephone system, etc.
Note: If desired, the All RAM Clear setting can be used to erase all user programmed information, all
documents in memory, and reset the memory switches to factory defaults. For information on the All RAM
Clear setting, see the next section.
1. To clear programmed data and user settings, from standby, press
Program, *, 2.
2. Press
ENTER.
Note:
To finish the operation without performing initialization, press
STOP
or
PROGRAM.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)