Filter
Top Products
Page: 61
Service Manual for OF5800
Chapter 3 Adjustment Procedures
Bit
Initial Setting Adjustment Usage / Comments
7 0 Factory use only
6 1
5 1
4 0
Ring signal detect time Sets the time an incoming ring will not be
detected after hanging up in the Fax/Tel Ready
mode.
6 5 4
1 1 0 800 ms.
1 1 0 700 ms.
1 0 1 600 ms.
1 0 0 500 ms.
0 1 1 400 ms.
0 1 0 300 ms.
0 0 1 200 ms.
0 0 0 100 ms.
3 0 Number of rings
0: 1 ring
1: 2 rings
Sets the number of rings in the Fax/Tel Ready
mode. Incoming calls are answered according
to this setting regardless or the number of rings
chosen in the User Settings.
2 0 Dual ring detection:
0:No
1:Yes
When enabled, the unit is able to auto answer
an incoming ring with an off time of 120 -
600ms.
1 0 Long ring detection:
0:No
1:Yes
Allows the unit to respond to an incoming ring if
the ring on-time is longer than two seconds.
0 1 Ring frequency
detection
0:No
1:Yes
When disabled, the unit will not check the ring
frequency of incoming rings.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)