Filter
Top Products
Page: 149
Service Manual for OF5800
Chapter 4 Troubleshooting Procedures
Symptom: The unit rings but will not auto-answer.
Suggested corrective action:
Check the power cord and AC switch.1.
Verify the telephone line is properly installed.2.
Verify recording paper in the unit.3.
Check memory capacity. The unit will answer incoming calls if memory is full.4.
Check the number of rings the unit is set to answer on. If set to a high number of rings, the 5.
transmitting unit may "time out."
Insure the unit is in the Fax Ready mode.6.
Verify operation of DRD is applicable.7.
Check the operation of the NCU pcb and the main control pcb.8.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)