Filter
Top Products
Page: 141
Service Manual for OF5800
Chapter 4 Troubleshooting Procedures
Symptom: Recording paper did not exit paper cassette properly, or a jam occurred in print area.
Suggested corrective action:
Verify that the recording paper conforms to the type specified for use in the machine and that has not 1.
been damaged or exposed to moisture.
Make sure the recording paper is properly loaded into the paper tray and cassette and the cassette is 2.
properly closed.
Clean the paper feed rollers of any paper dust buildup. (Clean using a lint-free cotton cloth moistened 3.
with a cleaning designed for use on rubber rollers.) Replace the paper feed rollers if worn or damaged.
Check the cassette pressure springs for proper installation and operation.4.
Verify that the paper has reached sensor PC1. If it has, check the operation of PC1.5.
Verify the paper take up roller is turning. If not check the main motor. If the main motor is turning, 6.
check the operation of the paper feed solenoid.
If the main motor does not turn, replace the main motor, the power supply unit or the mechanical 7.
control pcb.
Check for obstructions in the paper path.8.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)