Filter
Top Products
Page: 74
Service Manual for OF5800
Chapter 3 Adjustment Procedures
Bit
Initial Setting Adjustment Usage / Comments
7 0 EYE-Q slice level
0: Disable
1: Enable
Setting this bit to "1" enables memory switch
D:2,bits 0-3 and memory switch D:1, bits
0-7, and enables EYE-Q check Adjustment.
6 1 Check EYE-Q
0:No
1:Yes
0: Line condition status (EYE-Q) is not
checked after checking TCF.
1: Line condition status (EYE-Q) is checked
after checking TCF.
5 0 Factory use only.
4 0 Factory use only.
3 1
2 0
EYE-Q check level at 2400
bps
1 1
0 0
EYE-Q check level at 4800
bps
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)