Filter
Top Products
Page: 59
Service Manual for OF5800
Chapter 3 Adjustment Procedures
The following table provides a quick reference to the memory switches.
Group A Dialer
A:0
A:1 A:2 through A:4 A:5
CED detection
Dial tone detection
Phone line type
PBX mode dial pause Factory use only Ring signal detect time
Number of rings
Dual ring detection
Long ring detection
Ring frequency
detection
A:6 through A:9
Factory use only
Group B: Transmission
B:0
B:1 B:2 B:3
Busy tone detection
Fallback pattern
Overseas mode
V.29 echo protect tone
Maximum transmit
speed
The time between CFR
and transmission of
data.
Interval between DCS
and TCF.
Output attenuation
when individual
autodialer attributes set.
Data signaling rate
V17/V33(DCS)
Set remote machine
receiving direct.
European date format
on TTI.
TTI transmit
ECM response time
ECM error retransmit.
Interval between DCS
and TCF.
B:4 B:5 B:6 through B:9
Factory use only Program individual
autodialer attributes.
Relay broadcast
Proprietary handshake.
Sending RTC signal
when transmission is
canceled.
Cancel redial if
transmission error
occurs.
Action after EOR signal.
Factory use only
Group C: Reception
C:0
C:1 C:2 through C:9
Data error rate
pause one second after
sending CED.
Receive speed
T1 timer
DIS/DTC expand frame
transmit.
G3 echo receive.
Factory use only