Filter
Top Products
Page: 131
Service Manual for OF5800
Chapter 3 Adjustment Procedures
This mode is used to test the SRAM memory where user programmed parameters such as date, time,
TTI, etc are stored. Note: When this test is executed, an All RAM Clear will be performed by the unit. The
All RAM Clear erases all user settings and resets all memory switches, machine parameters and unique
switches to factory defaults.
1. Press
PROGRAM, *, B
. Then press
E.
The values FF, AA, 55, and 00 are written to, then read from, memory. The results are show in the
display. If the read/write test is successful, the display will show "OK" after each value.
If some portion of the read/write test fails the display will show "NG" after the failed value.
2. Upon completion, the unit will return to the standby mode.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)