Page: 142
Service Manual for OF5800
Chapter 4 Troubleshooting Procedures
Symptom: Recording paper jammed as it was exiting the unit into receive paper tray.
Suggested corrective action:
Check for obstruction in the paper path.1.
Check the paper exit sensor (PC3) for proper operation.2.
Clean the exit roller using a lint-free cloth moistened with a cleaning solution designed for use on 3.
rubber rollers. Replace the exit roller if worn or damaged.
Verify the fuser rollers are clean and not damaged. If worn or damaged, replace the fuser.4.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)