Filter
Top Products
MAC OS X > 106
CONFIGURING INSTALLED HARDWARE OPTIONS
When you set up a printer using AppleTalk or USB, the printer’s
installed hardware options are normally detected and automatically
configured. However, if you are setting up a printer using TCP/IP, or
have added any additional hardware options since setting up the
printer, you need to manually configure installed hardware options.
TO MANUALLY CONFIGURE INSTALLED HARDWARE
OPTIONS:
1.
Launch the
Print Center
utility. This is located in the
Applications/Utilities
folder.
2.
Select the printer model in
Print Center.
3.
From the
Printers
menu, select
Show Info
.
NOTE
This information is for Mac OS X 10.2 or higher only. This feature is not
available on Mac OS X 10.0 - 10.1.5.