Filter
Top Products
MAC OS 9.X / CLASSIC > 58
USB CONNECTION
This installation procedure uses Apple's Desktop Printer Utility to
connect the printer to your Mac. You cannot connect to a PostScript
printer over USB using the Chooser.
To set up the printer using a USB connection:
(a)
If you have not already done so, run the installer
program to install the software.
(b)
Restart your computer if prompted to do so.
1.
Launch the
Desktop Printer Utility
.
2.
Select
Printer (USB)
and click
OK
.
3.
Click on the bottom
Change
button to select the printer.
4.
Select the printer that is connected to your Mac and click
OK
.
5.
The Desktop Printer Utility should have automatically located
the correct PPD file for your printer. If the PPD file does not
correspond to your printer model (for example if “Generic” is
listed), click the uppermost
Change...
button and select the
appropriate file for your printer.
6.
Click
Create
.
This prompts you to give the printer a name.
7.
Enter the name you wish to use and click
Save...
.
A printer icon is created on your Desktop.
NOTE
> The Desktop Printer Utility is not provided by Oki. There may be a
copy ofthe Desktop Utility on your Mac hard disk, located in the
“Applications (Mac OS 9)” folder, under “Utlities”. Alternatively, the
utility can be installed by performing Custom installation from the
Mac OS 9 Installation CD.
> At this step you are given the choice of creating a Desktop Printer
using either the Adobe PostScript driver (if installed) or the
LaserWriter driver. Choose the LaserWriter driver.