Filter
Top Products
WINDOWS 9X DIFFERENCES > 39
PostScript Emulation
1.
In the driver window, on the Device Options tab, select Store to
HDD (1).
2.
In Printer Features, select Password 1 (1 above) and select a
number from 0 - 9 in the Change Setting for: drop-down box (2
above). Repeat for passwords 2 - 4.
3.
Click OK again to close the driver window, and again to close
your application’s Print dialogue.
The document will be sent to the printer’s hard disk but will not print.
See Chapter “Printer Settings in Windows” for information on printing
stored documents.
NOTE
A “Password” is part of a PIN.
Password 1 is the first digit of a PIN, Password 2 is the second digit of a
PIN etc.
1
1
2