Omron CVM1-CLK21 Network Card User Manual


 
xiv
Section 7 describes the method used to connect multiple networks through CS/CJ-series, CVM1, and
CV-series PLCs. The section also describes remote programming and monitoring with Programming
Devices.
Section 8 explains details on Controller Link Network communications. Refer to this section for net-
work communications that require accurate communications timing.
Section 9 provides information on troubleshooting errors that occur during Controller Link Unit opera-
tion, as well as daily inspection, cleaning, and other maintenance procedures.
Section 10 provides information on functions that can be performed without turning OFF the PLC
power to the existing network, such as adding nodes to the Controller Link Network using a Repeater
Unit and changing data link tables while the data links are active.
Appendix A provides a list of standard OMRON products related to Controller Link Networks.
Appendix B provides easy reference to the words in PLC memory areas used by Controller Link Net-
works.
Appendix C provides information on how to use the CJ1W-TB101 Wired Controller Link Unit Relay
Terminal Block, including details on connection and replacement.
!WARNING Failure to read and understand the information provided in this manual may
result in personal injury or death, damage to the product, or product failure.
Please read each section in its entirety and be sure you understand the infor-
mation provided in the section and related sections before attempting any of
the procedures or operations given.