Filter
Top Products
6-9SectionSystem Settings
174
6-9-6 Setting the Print Method (NT31C Only)
The NT31/NT31C has a function for printing out data at a printer connected to it
in response to an instruction from the host or operation at the NT31/NT31C.
When using the NT31C, the currently displayed screen image or other data can
be printed out in color. You can select whether screen data is actually printed out
in color, or in monochrome tones that represent colors, with this memory switch
setting.
When PCL 5 is set for Printer Controller, the setting is fixed as Tone.
• Color: Color images are printed in color.
• Tone: Color images are printed in monochrome tones.
The default (factory) setting is Tone.
Reference: S In addition to this setting, NT31C has the Printer Controller setting (page 172).
S For details on the print function, refer to 2-15-7 Print Function in the Reference
Manual.
Set the print method setting by following the menu operation from the System
Menu shown below.
Select Maintenance Mode.
Select Memory Switch.
Press Print Method to display the required
printing method.
The setting option changes each time the
touch switch is pressed.
Ver 3.10
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [
] (previous screen) touch switch, then make the setting.
• To confirm the settings and quit the memory switch setting screen, press the
Quit touch switch. The settings made last will be set and the NT31/NT31C will
return to the MAINTENANCE MODE MENU screen.