Filter
Top Products
6-12SectionProgramming Console Function
224
6-12-3 Method of Use
The Programming Console screen is displayed by operating the system menu
as described below.
Select Expansion Mode.
Select Programming Console.
The Programming Console screen is dis-
played.
Press the Programming Console sheet keys
(touch switches) for the operation.
Press the Quit touch switch to exit the
screen.
An error is displayed if a wrong communica-
tion protocol is selected or a Programming
Console is connected to the peripheral
port.
(*1)
Ver 3.10
*1: With the CS1G/CS1H, the Programming Console function can be used
simultaneously at both the built-in RS-232C port and peripheral port.
Reference: When an error screen is displayed, the system menu can be displayed by press-
ing two of the four corners of the touch panel simultaneously. The Check touch
switch on the screen can also be used to display the system menu, but it will not
work unless the cause of the error has been removed. If the system menu is not
displayed when the Check touch switch is pressed, press two of the four corners
of the touch panel to return to the system menu.