Filter
Top Products
110 Chapter 6 Configur ing RMON using Device Manager
Table 47 "Log tab fields" (page 110) describes the Log tab fields.
Table 47
Log tab fields
Item Description
Time An implementation-dependent description of the event that
activated the log entry.
Description Specifies whether the event is a rising or falling event.
RMON tab for graphing ports
The RMON tab displays Ethernet statistics for graphing a port or ports.
To open the RMON tab for graphing:
Step Action
1
Select the port or ports you want to graph.
To select multiple ports, [Ctrl] + left-click the ports that you want to
configure. A yellow outline appears around the selected ports.
2
Do one of the following:
•
From the Device Manager main menu, choose Graph > Port.
•
From the shortcut menu, choose Graph.
•
On the toolbar, click Graph.
The Port dialog box for a single port or for multiple ports opens with
the Interface tab displayed.
3
Click the RMON tab.
The RMON tab for graphing multiple ports opens (Figure 48 "Graph
Port dialog box -- RMON tab" (page 111)).
—End—
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.