Filter
Top Products
48 Chapter 3 Configuring network monitoring using Device Manager
Step Action
1
From the Device Manager menu bar, select Edit > Diagnostics >
System Log.
The SysLog dialog box opens with the System Log Settings tab
displayed.
2
Click the Remote System Log tab.
The Remote System Log tab opens (Figure 13 "Remote System
Log tab" (page 48)).
Figure 13
Remote System Log tab
—End—
Table 16 "Remote System Log tab items" (page 48) describes the Remote
System Log tab items.
Table 16
Remote System Log tab items
Items Description
Address The IP address where log messages are sent
using the remote syslog facility.
Enabled Specifies that the remote logging feature is
enabled.
SaveTargets Specifies the type of log messages to be sent to a
remote syslog server when they occur. Messages
are classified based on their type:
•
Critical - Specifies that only critical messages
are sent to the remote syslog server.
•
Critical/Serious - Specifies that both critical
and serious messages are sent to the remote
syslog server.
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.