Filter
Top Products
Graphing port statistics 57
The graphPort dialog box for a single port or for multiple ports opens with
the Interface tab displayed.
Note: Some statistics are available only when you graph a single port.
Interface tab for graphing ports
The Interface tab shows interface parameters for graphing a port or ports.
To open the Interface tab for graphing:
Step Action
1 Select the port or ports you want to graph.
To select multiple ports, [Ctrl] + left-click the ports that you want to
configure. A yellow outline appears around the selected ports.
2
Do one of the following:
•
From the Device Manager main menu, choose Graph > Port.
•
From the shortcut menu, choose Graph.
•
On the toolbar, click Graph.
The Port dialog box for a single port or for multiple ports ( Figure 18
"Interface tab for graphing ports" (page 57)) opens with the Interface
tab displayed.
Figure 18
Interface tab for graphing ports
—End—
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.