Filter
Top Products
Viewing system statistics 71
Table 26 "Address-based monitoring modes" (page 71) describes
the address-based monitoring modes.
Table 26
Address-based monitoring modes
Item Description
Disabled Choose this option to disable port-based monitoring.
The default setting is Disabled.
Address A --> any Address Choose this option to monitor all traffic transmitted from
Address A to any address.
any Address --> Address A Choose this option to monitor all traffic received by Address A
from any address.
<-- --> Address A Choose this option to monitor all traffic received by or
transmitted by Address A.
Address A --> Address B Choose this option to monitor all traffic transmitted by Address
A that goes to Address (one way conversation steering).
Address A <-- --> Address B Choose this option to monitor all traffic received by Address A
and then transmitted by Address B or transmitted by Address A
and received by Address B (two way conversation steering).
—End—
Viewing system statistics
The options available to monitor system statistical data are:
•
"Viewing port statistics" (page 71)
•
"Viewing all port errors" (page 74)
•
"Viewing interface statistics" (page 76)
•
"Viewing Ethernet error statistics" (page 77)
•
"Viewing transparent bridging statistics" (page 79)
Viewing por t statistics
You can view detailed statistics about a selected switch port in a stacked
or stand-alone configuration. Both received and transmitted statistics are
displayed so that you can compare throughput or other port parameters.
To view statistical data about a selected switch port:
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.