Filter
Top Products
70 Chapter 4 Configuring network monitoring using Web-based management
Table 25 "Port-based monitoring modes" (page 70) describes the
port-based monitoring modes.
Table 25
Port-based monitoring modes
Item Description
Disabled Choose this option to disable port-based monitoring.
The default setting is Disabled.
--> Port X Choose this option to monitor all traffic received by port X.
Port X --> Choose this option to monitor all traffic transmitted by
port X.
<-- --> Port X Choose this option to monitor all traffic received and
transmitted by port X.
--> Port X or Port Y --> Choose this option to monitor all traffic received by port
X or transmitted by port Y.
Note: Do not use this mode for multicast and broadcast
traffic.
--> Port X and Port Y --> Choose this option to monitor all traffic received by port X
(destined to port Y) and then transmitted by port Y (one
way conversation steering).
Note: Do not use this mode for multicast and broadcast
traffic
<-- --> Port X and Port Y <-- --> Choose this option to monitor all traffic received by port
X and then transmitted by port Y or transmitted by port X
and received by port Y (two way conversation steering).
Note: Do not use this mode for multicast and broadcast
traffic
Selecting any one of the address-based monitoring modes activates
the Address A and Address B screen fields, where you can specify
MAC addresses to monitor.
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.