Filter
Top Products
20 Chapter 1 Network monitoring
Figure 4
Address-based mirroring configuration example
In this configuration, the designated monitor port (port 23) can be set to
monitor traffic in any of the following modes:
•
Monitor all traffic transmitted from address A to any address.
•
Monitor all traffic received by address A from any address.
•
Monitor all traffic received by or transmitted by address A.
•
Monitor all traffic transmitted by address A to address B.
• Monitor all traffic between address A and address B (conversation
between the two stations).
Figure 5 "Port Mirroring Configuration address-based screen example"
(page 21) shows the Port Mirror ing Configuration screen setup for this
example.
In this example, port 23 becomes the designated Monitor Por t for Switch S1
when you press Enter in response to the [Yes] screen prompt.
Nortel Ethernet Switch 460/470
Configuration — System Monitoring
NN47210-503 01.01 Standard
3.7 22 February 2007
Copyright © 2005-2007, Nortel Networks Nortel Networks Confidential
.