Filter
Top Products
6. Write the length in box F6 on the Format Worksheet.
Remember to use your selected units.
System Units Example
English 1/100 in 1 in = 100 units
Metric 1/10 mm 1 mm = 10 units
Graphic Dots 100 dots = 100 units
Ranges for supply length are
English 075 - 900
Metric 190 - 2290
Dots 144 - 1728
7. Measure the width of the supply
from left to right, using the ruler
marks at the bottom of the grid.
Write the width in box F7.
Ranges for supply width are
English 075 - 250
Metric 190 - 635
Dots 144 - 480
8. Move the supply to the field reference corner just outside
the grid. Trace an outline of the supply on the grid.
9. Assign a name (up to eight characters) to the format.
Write the name in box F8, with quotation marks, as follows:
"LABEL 1"
If you want the printer to assign a name to the format,
place quotation marks, with no characters or spaces
between them, in box F8. The printer will assign a name in
the form of AUTOnnnn, where nnnn is a unique number.
10. Make sure you have filled in boxes F1 through F8 on the
Format Worksheet.
9401/9402 System Administrator’s Guide
2-12