Filter
Top Products
Utility Descriptions 5-39
bw40
— For a color graphics adapter with color disabled and 40
characters per line.
bw80
— For a color graphics adapter with color disabled and 80
characters per line.
co40
— Indicates a color monitor with color enabled and 40 characters
per line.
co80
— Indicates a color monitor with color enabled and 80 characters
per line.
mono
— For a monochrome display. Assumes 80 characters per line.
The final syntax sets the number of
display lines
. Valid values included
L25, L43, and L50.
Note: A serial port should be initialized before an LPT device is
redirected to it.
Examples
MODE COM1:9600,n,8,1
Modifies the settings for the COM1 device to a baud rate of 9600, no
parity, eight data bits, and one stop bit.
MODE LPT2:=COM2
Redirects the output from LPT2 to the COM2 serial port. All following
output to LPT2 actually goes to the COM2 device.
MODE mono
Indicates a monochrome display adapter.