5-12 Programmer’s Manual
I2OF5INFO
The I2OF5INFO data structure contains scanner configuration
information about I 2 of 5 bar codes. To read these values,
applications call scnGetI2of5Info; to set these values, they call
scnSetI2of5Info.
typedef struct _I2of5Info
{
unsigned char uchEnable;
unsigned char uchLength1;
unsigned char uchLength2;
unsigned char uchChkDgtAlgorithm;
unsigned char uchXmitCheckDigit;
unsigned char uchCvtI2of5toEAN13;
} I2OF5INFO;
Field Description
uchEnable Enable/disable the ability to scan I 2 of 5
bar codes.
Default: SCN_ENABLE
uchLength1
uchLength2
Specifies lengths (including check digits)
for I 2 of 5 bar codes. You can specify
one or two lengths, a range of lengths, or
that any length is valid. Enter values as
follows:
Option uchLength1 uchLength2
1 Length Value 0
2 Lengths High Value Low Value
Range Min. Value Max. Value
Any length 0 0
Selecting the any length option may lead
to mis-decodes.
Default: 14 (uchLength1) and 0
(uchLength2).
