Filter
Top Products
CDM-600 Satellite Modem Revision 7
Remote Control MN/CDM600.IOM
16–13
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response
to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Transmit
Terrestrial
Alarm Mask
TTA= 1 byte, 0 or 1 Command or Query. (DROP mode parameter)
Transmit terrestrial Alarm Mask conditions, where:
0=Alarm is active (unmasked).
1=Alarm is masked.
Example: TTA=1 (masks an alarm).
TTA=
TTA?
TTA*
TTA#
TTA? TTA=x
(see description of
arguments)
Drop Type DTY= 1 byte, value
of 0 thru 3
Command or Query. (DROP/D&I++ mode parameter)
Drop Type where:
0=T1–D4
1=T1–ESF
2=E1–CCS
3=E1–CAS
DTY=
DTY?
DTY*
DTY#
DTY? DTY=x
Tx Ternary
Code
TTC=
1 byte, value
of 0 thru 3
Command or Query. (G.703 Parameter)
Tx Ternary Code, where:
0=AMI
1=B8ZS
2=B6ZS
3=HDB3
Example: TTC=1 (selects B8ZS)
TTC=
TTC?
TTC*
TTC#
TTC?
TTC=x
(see description of
arguments)
Transmit
Backward
Alarms
Enable
TBA= 4 bytes,
each a value
of 0 thru 2
Command or Query. (IDR Parameter)
Enable Transmit backward alarm enable:
0=Disable
1=Enable Internal (S/W)
2=Enable External (H/W)
Example: TBA=0120
TBA=
TBA?
TBA*
TBA#
TBA? TBA=xxxx
Position indicates
backward alarm
numbers: 1234
Transmit ESC
Type
TET= 1 byte, 0 or 1 Command or Query. (IDR Parameter)
Sets or queries IDR ESC Type, where:
0=64k data channel
1=2 Audio channels
TET=
TET?
TET*
TET#
TET? TET=x